Orifice Flow computer PR5618-OFC
- 5.6″ color TFT touchscreen display
- Up to 8 universal inputs
- 2 to 10 programmable relay contact outputs
- 2 programmable analog outputs with PID controller option
- Calculations according to AGA3
- Ability to calculate gas compressibility coefficient Z based on AGA8 and NX19 standards.
- RS-485 serial port with Modbus protocol
- Ethernet port with Modbus-TCP & OPC-UA protocol
- designed in size 144mm*144mm*200mm
TECHNICAL DATA
|
Number of streams |
up to 2 runs |
|
Calculation cycle |
1second |
|
Boot time |
1second after power up |
|
Calculations |
compressibility factor NX19&AGA8 full gas composition flow rate AGA3 |
|
Data logging |
Measurement archives; flexible data logging structure with a very large database size |
|
Data communication |
1USB interface on the front panel for parameterization and servicing purposes 1 TCP/IP interface,serial interfaces(RS485) |
|
Serial communication |
MODBUS ASCII/RTU |
|
Ethernet communication |
MODBUS/TCP |
|
Inputs |
8universal signal inputs ( RTD, mA, V, Frequency), full isolated, 16-bit ADC, 1 sample/sec |
|
Outputs |
10relays (NC & NO ,3A-24VDC, 3A-120VAC) .2 Analog output (0/4-20-mA, full isolated ) |
|
Display |
5.6inch full-color wide screen display with 640*480 pixels with LED backlight Operation:touch screen display |
|
Hardware architecture |
ARM CORTEX·M7 32-bit at 480 MHz; 64MB RAM; min. 16GB flash memory |
|
Power supply |
24V DC +/- 20"-", power consumption up to 15 w OR AC 100 to 240 V +10/-15%,50/60 Hz |
|
Operating |
Operating Temperature -10°C to +50°C |
|
Dimension |
144mm*144mm * 200mm, Panel mounted |
Reviews
There are no reviews yet.