Orifice Flow computer PR5618-OFC
- 5.6″ color TFT touchscreen display
- Up to 8 universal inputs
- 2 to 10 programmable relay contact outputs
- 2 programmable analog outputs with PID controller option
- Calculations according to AGA3
- Ability to calculate gas compressibility coefficient Z based on AGA8 and NX19 standards.
- RS-485 serial port with Modbus protocol
- Ethernet port with Modbus-TCP & OPC-UA protocol
- designed in size 144mm*144mm*200mm
TECHNICAL DATA
Number of streams | up to 2 runs |
Calculation cycle | 1second |
Boot time | 1second after power up |
Calculations | compressibility factor NX19&AGA8 full gas composition flow rate AGA3 |
Data logging | Measurement archives; flexible data logging structure with a very large database size |
Data communication | 1USB interface on the front panel for parameterization and servicing purposes 1 TCP/IP interface,serial interfaces(RS485) |
Serial communication | MODBUS ASCII/RTU |
Ethernet communication | MODBUS/TCP |
Inputs | 8universal signal inputs ( RTD, mA, V, Frequency), full isolated, 16-bit ADC, 1 sample/sec |
Outputs | 10relays (NC & NO ,3A-24VDC, 3A-120VAC) .2 Analog output (0/4-20-mA, full isolated ) |
Display | 5.6inch full-color wide screen display with 640*480 pixels with LED backlight Operation:touch screen display |
Hardware architecture | ARM CORTEX·M7 32-bit at 480 MHz; 64MB RAM; min. 16GB flash memory |
Power supply | 24V DC +/- 20"-", power consumption up to 15 w OR AC 100 to 240 V +10/-15%,50/60 Hz |
Operating | Operating Temperature -10°C to +50°C |
Dimension | 144mm*144mm * 200mm, Panel mounted |
Reviews
There are no reviews yet.